Siemens Steam Turbines
Skip to Content
Siemens Steam Turbines
Industrial steam turbine for output ranges of up to 50 MW
The SST-300 is an optimal solution for a wide range of applications due to the implementation of the best technology combined with over 20 years of experience. In the last decade alone, this turbine has been installed in over 500 industrial and power applications by customers all over the world.
The flexible configuration of the SST-300 enables it to be used in diverse applications such as waste-to energy, chemical processing, pulp and paper, cement and many more. The SST-300 is used for both condensing and backpressure applications with internally controlled extractions and scope for multiple uncontrolled extractions.
All components and auxiliaries including the lube oil system are mounted on a common base frame. The turbine can be configured with either an upward, downward or axial exhaust orientation depending on the layout of the plant. The turbine can also accommodate multiple extraction / steam induction points as well. The compact design and simple layout of the turbine significantly reduces cost and time associated with its construction, inspection and maintenance.
SST-300 turbines are delivered as packaged units. The number of external connections is reduced to the minimum and all connections (piping, wiring, etc.) are clearly defined according to standards such as ASME and DIN. This reduces the time frame for commissioning extraordinarily.
The SST-300 baseframe packaged unit can either be placed on a simple ground-level concrete block foundation or on an elevated foundation. The “plug and play” system reduces site construction time and does not require personnel with advanced skills.
|Power output||up to 50 MW|
|Turbine speed||up to 12,000 rpm|
|Inlet steam pressure||up to 120 bar|
|Inlet steam temperature||up to 520°C|
|Uncontrolled extractions (up to 6)||up to 60 bar|
|Pressure||up to 45 bar|
|Temperature||up to 400°C|
|Back pressure||up to 16 bar|
|Condensing pressure||up to 0.25 bar|
|District heating||up to 3.0 bar|
|Exhaust area||0.28 to 1.6 m²|
All data are approximate and project-related.
Typical dimensions of the SST-300 series
Length (L): 12 m / Width (W): 4 m / Height (H): 5 m
Customer Support Center
Phone: +49 180 524 70-00
Video: Energy from Waste